| 07年装备召回汇总 |
|
| 采编： Administrator | |
|
一年又过去了,是时候汇总一下07年被召回的产品。 各位潜友如果有这些装备，请尽快联络厂商咯。 其中, 第三项的Oceanic 和 Aeris 的呼吸调节器召回非常重要, 去年买过这两个牌子一级调节器的朋友务必请仔细检查一下. 1. Innovative Scuba Concepts Scuba Regulator Component 解决方案: 停止使用, 联系销售商退货. 附:厂商公告 RECALL: Innovative Scuba Concepts Scuba Regulator ComponentMay 31, 2007 The U.S. Consumer Product Safety Commission, in cooperation with the firm named below, today announced a voluntary recall of the following consumer product. Consumers should stop using recalled products immediately unless otherwise instructed. Name of product: Swivel for a Scuba Regulator Units: About 170 Importer: Innovative Scuba Concepts Inc., of Colorado Springs, Colo. Hazard: The swivel, which is attached to a diving regulator, could separate while diving. This will result in a complete and sudden loss of the diver's air supply, causing the diver to engage in emergency ascent procedures. This poses a risk of decompression sickness due to rapid ascent, and air embolism or drowning if the diver panics or the emergency ascent procedure fails. Incidents/Injuries: The firm has received one report where the swivel separated during a dive and caused the diver to ascend using the buddy breathing technique. No injury was reported. Description: The recall involves the HO110 Swivels sold as an aftermarket regulator component. There are no markings such as a date or production code embossed on the unit. Contact Innovative Scuba Concepts for information on where the recalled units were sold. Sold at: Specialty retail dive stores nationwide from January 2006 through March 2007 for about $40. They also could have been installed by a dive shop regulator technician. Manufactured in: Taiwan Remedy: Consumers should stop using regulators with the swivel attached and contact the dive store where purchased for a refund. Consumer Contact: For additional information, contact Innovative Scuba Concepts Inc. at (800) 472-2740 between 9 a.m. and 5 p.m. CT Monday through Friday, or visit the firm's Web site at www.innovativescuba.com 2. M&J Engineering SW-3000 Aga OmniSwivel 原因: 装备在潜水是可能会突然与面镜分离. 解决方案: 停用,联系销售商退货. 附: 召回原文公告 RECALL: M&J Engineering SW-3000 Aga OmniSwivelAugust 29, 2007 WASHINGTON, D.C. - The U.S. Consumer Product Safety Commission, in cooperation with the firm named below, today announced a voluntary recall of the following consumer product. Consumers should stop using recalled products immediately unless otherwise instructed. Name of Product: AGA Swivels for Scuba Diving Masks Units: About 1,500 Manufacturer: M&J Engineering, of Poway, Calif. Hazard: The swivel, which is attached to a diving mask, could separate while diving. This will result in a sudden loss of the diver's air supply, causing the diver to engage in emergency ascent. This poses a risk of decompression sickness due to rapid ascent or drowning. Incidents/Injuries: M&J Engineering has received one report of swivels separating from the masks while diving. No injuries have been reported. Description: This recall involves all SW-3000 2nd stage 360-degree swivels for scuba diving masks manufactured between January 2004 and February 2005. The swivel has the date stamped on its body, below the patent number. Swivels that are already repaired have an arrow stamped on the top right corner of the swivel body. Sold at: Diving retail stores nationwide between January 2004 and February 2005 for about $60. Manufactured in: USA Remedy: Consumers should immediately stop using the scuba diving masks with the swivel attached and contact M&J Engineering to receive a free repair. Consumer Contact: For additional information, contact M&J Engineering toll-free at (888) 794-8351 Monday through Friday between 8 a.m. to 5 p.m. PT, e-mail 电子邮件地址已被防垃圾邮件功能所隐藏， 您需要把Javascript功能打开才能看到。 , or visit the company's Web site at www.mj-engineering.com 3. Oceanic 及 Aeris 的 呼吸调节器 受影响型号: 原因: 装备可能丧失功能,导致使用者严重受伤或有生命危险. 目前为止已经有两例因此导致死亡的个案,另有六例测试出现问题的报告. 解决方案: 立即停用, 联系销售商退货. 附: 召回公告原文 RECALL: Oceanic and Aeris RegulatorsDecember 11, 2007 WASHINGTON, D.C. - The U.S. Consumer Product Safety Commission, in cooperation with the firm named below, today announced a voluntary recall of the following consumer product. Consumers should stop using recalled products immediately unless otherwise instructed. Name of Product: Oceanic and AERIS SCUBA Regulator First Stages Units: About 6,000 Manufacturer: ROMI Enterprises, of San Leandro, Calif. Hazard: An internal component that seals air between the high pressure first-stage and the intermediate pressure second-stage can fail. This can result in uncontrolled flow of air to the diver and pose a risk of serious injury or death. Incidents/Injuries: ROMI has received two reports of units malfunctioning during diving and six reports of units malfunctioning while being tested by dealers prior to delivery to consumers. No injuries reported. Description and Models: The recall involves the following regulator first stages:
The model and serial numbers are stamped on the side of the body or on the body's rubber covering. Sold at: The items were either sold or repaired at authorized Oceanic and AERIS retailers nationwide from May 2006 through October 2007. The items sold for between $300 and $500. Manufactured in: United States and Taiwan Remedy: Consumers should immediately stop using the recalled regulator first stages and take them to any authorized Oceanic or AERIS dealer for a free replacement part. Consumer Contact: For further information or to determine if your specific unit is affected, contact ROMI toll-free at (888) 636-9390 between 8 a.m. and 5 p.m. PT Monday through Friday. Oceanic customers can send an e-mail to 电子邮件地址已被防垃圾邮件功能所隐藏， 您需要把Javascript功能打开才能看到。 or visit the firm's Web site at www.oceanicworldwide.com. AERIS customers can send an e-mail to 电子邮件地址已被防垃圾邮件功能所隐藏， 您需要把Javascript功能打开才能看到。 or visit the firm's Web site at www.diveaeris.com  (0) |
| 下一篇 > |
|---|
